FPV

Drones

we do these things not because they are easy, but because we thought they were going to be easy

Builds

Jeno 7" — Long Range Analog 6S

2026 — in progress

My first 7-inch long-range FPV build, based on the Jeno 7 frame made from T700 carbon fiber with 8 mm arms. The setup features a 5.8 GHz analog FPV system, a GEPRC F722 flight controller with a 65A ESC, FlyFishRC 2806.5 1350KV motors, and a 6S LiPo battery. Planned GNSS GPS integration for telemetry and navigation.

  • Frame: Jeno 7" — Carbon T700, 8 mm arms, High Tilt 40° camera plates
  • Frame accessories: Steel 10.9 hardware, standoffs, silicone LiPo pad, purple TPU arm guards
  • Motors: 4× FlyFishRC Flash 2806.5 — 1350KV
  • Propellers: HQProp 7035 — 7×3.5×3, M5
  • Spare propellers: Gemfan Flash 7040 — 7×4×3
  • Flight Controller: GEPRC Taker F722 V2 — ICM42688-P
  • ESC: GEPRC Taker BLS 65A V2
  • FPV Camera: Caddx Ratel 2 — Analog
  • VTX: RUSH TANK Ultimate — 5.8 GHz, 48CH, 25–1000 mW
  • Video Antenna: Foxeer Lollipop 4 Plus — RHCP 5.8 GHz, MMCX
  • GPS: BZGNSS P18 Pro — GNSS module
  • Battery: Tattu R-Line V6.0 S.Q — LiPo 6S 1480 mAh 160C
  • Charger: HOTA D6 Pro AC/DC — 200W AC / 2×325W DC